Energy Industrial

Energy Industrial Company was established in Sharjah, UAE in 1998 as the manufacturing arm for Energy International Corporation USA. Energy Industrial supplies a line of HVAC products including general and industrial fans, VAVs, sand trap louvers and silencers. Energy Industrial also offers a comprehensive line of HVAC sensors and transmitters with custom-made control panels.

Energy Industrial is a licensed manufacturer of PennBarry products in the Middle East. For more information on Energy Industrial products contact your Energy International representative.
Energy Industrial Representative
In Riyadh, KSA

Majd Kanaan
T:+966 11 476 2755
M:+966 55 880 6901
majd.kanaan@energyintl.com

In Jeddah, KSA

Fadi Fakih
T:+966126629368
M:+966-534286827
fadi.fakih@energyintl.com

In Dammam, KSA & Bahrain

Marwan Mroueh
T:+966 13 834 7837‬
M:+966 53 030 8349
marwan.mroueh@energyintl.com

In The UAE & Oman

Khalil Bilan
T:+971 6 534 3477
M:+971 50 818 5351
kbilan@energyintl.com

In Lebanon

Bechara Saab
T:+961 5 450 610
M:+961 3 305816
bsaab@energyintl.com

In Jordan

Fadi Rashid
T:+962-6-556-1718
M:+962-79-7565677
fadi.rashid@energyintl.com

In Qatar

Ziad Khaled
T: +974 44642316
M: +974 55230535
ziad.khaled@energyintl.com

Specialty Ventilation Products

Medi-Clean Unit (MCU 900) Portable HEPA Filtration System

MCU 900

[PT, HPA, PA]

Features

  • Front panel Includes power selector knob, power indicator lamp, run indicator lamp, check filter alarm
  • High-efficiency fan can develop up to 32 ACH for a room size of 5 x 4 x 2.4 m with an airflow equivalent to 900 CFM
  • All components are accessible through hinged doors for easy maintenance and service
  • Quiet operation: 500 CFM = 50 DbA at 1 meter; 700 CFM = 54 DbA at 1 meter; 900 CFM = 60 DbA at 1 Meter

General & Industrial Ventilation Products

gravity-vent

Gravity Ventilators
  • Turbines: General Ventilation of Factories, Farm/Agricultural Buildings, Commercial/Public Structures and Homes
  • Pul-Air for Air Exhaust with No Moving Parts
  • Unsul-Air for Extended Airshaft to Clear Roof Peaks, etc
Rooftop Fume Fans
  • Roof-Mount, Spun Aluminum Downblast
  • Direct or Belt Drive
  • Application: Fumes, Commercial Kitchens and Exhaust of Other Contaminants
  • U.L. 762 Rated for Grease-laden Air Exhaust
  • Capacity: 54 – 30,609 cfm; 0 – 4.7” w.g

Fume

Rooftop Fans
  • Roof-Mount, Spun Aluminum Downblast
  • Direct or Belt Drive
  • Application: General Exhaust for Schools and Office Buildings
  • Capacity: 44 – 46,640 cfm; 0 – 1.5” w.g

Blower

VCR

Blowers
  • Class I, II, III, IV Construction, Free Standing SWSI/DWDI Centrifugal Fan
  • Belt Drive
  • Backward Inclined and Airfoil Wheels
  • Application: Exhaust and Supply in Typical Duct Systems; Able to Handle Many Special Environments such as High Temperature, Corrosive and Spark Resistant
  • Capacity: Up to 264,000 cfm; 0 – 10.0” w.g
Industrial Supply Fans
  • Class I Heavy-Gauge Galvanized Steel, Roof/Floor/Inline Mount Utility Blower
  • Belt Drive; Backward Inclined Wheel
  • Application: Commercial Kitchen, Fume Exhaust, Pressurization, Supply Fresh Air
  • U.L. 762 Rated for Grease Laden
  • Air Exhaust
  • Capacity: 500 – 29,150 cfm; 0 – 5.0” w.g

Supply-Fan

ESI

Centrifugal Supply & Exhaust Fans
  • Class I, II Heavy-Gauge Steel, Mixed Flow Inline Fan
  • Belt Drive
  • Patented Wheel Design
  • Application: Exhaust, Supply or Return Air in Ducted (Medium to High) Pressure Systems Requiring Lower Sound Levels
  • Capacity: 1,300 – 155,000 cfm; 0 – 7.0” w.g
Inline Centrifugal Fans
  • Square Inline Duct-Mount
  • Direct or Belt Drive
  • Application: Supply, Return or Exhaust Air for General HVAC Systems
  • Capacity: 103 – 27,502 cfm; 0 – 3.5” w.g

dinline

supply

Ceiling Mounted Fans
  • Ceiling or Inline Mount
  • Low Sound Levels
  • Direct Drive
  • Application: General Exhaust for Lavatories, Conference Rooms and Institutions
  • Capacity: 32 – 3,290 cfm; 1.5” w.g
Propeller Fans
  • Wall-Mounted Propeller fans
  • Direct or Belt Drive
  • Applications: General Supply and Exhaust for Warehouses, Factories
  • Capacity: Up to 68,172 cfm; 0 – 1.8” w.g

Prop

MA Series

MA Series

Axial fans with automatic louver shutters for exhaust ventilation designed for ventilation shaft or duct connection
Capacity up to 345 m3/h

  • Casing and impeller made of high-quality, durable, UV resistant ABS plastic
  • High efficiency, long life operation
  • Thermal actuator provides smooth opening and closing of automatic louver shutters to prevent backdraft
  • Motor designed for continuous operation with no maintenance
MAO1 Series

Axial window fan with automatic louver shutters for exhaust ventilation
Designed for window mounting

  • Capacity up to 345 m3/h
  • Casing and impeller made of high-quality, durable, UV resistant ABS plastic
  • High efficiency, long life operation
  • Thermal actuator provides smooth opening and closing of automatic louver shutters to prevent backdraft
  • Motor designed for continuous operation with no maintenance

MAO1 Series

AVX

AXV Axial Fans
  • Compact Size, Low noise
  • High Efficiency, High Performance
  • Fully-adjustable blades
  • Standard diameters from 315 to 1,600 mm
  • Airflow rates up to 200,000 m3/h
  • Static pressure up to 1.500 Pa
  • Models available for high temperatures 3000C for 90 or 120 minutes and 4000C for 120 minutes
  • Casing is made of hot-dip galvanized steel with rolled flanges
Chemical-Resistant Centrifugal Fans
  • Backward-curved centrifugal fans with superior performance
  • High-efficiency impellers, reliable, maintenance-free
  • Excellent corrosion resistance
  • Casing made of thermoplastics PP, PVC, PE, PVDF or Glass-Reinforced Polyvinyl-ester depending on application
  • Casing is formed as a true spiral with a high-efficiency inlet cone to ensure an even distribution of air over the full width of the impeller
  • All fans are tested and rated in accordance with DIN 24163 and ISO 5801

Chem-fans

jetfans

Jet Fans Model JFUO
  • Tested and Certified in accordance with DIN EN 12101-3 and are subject to CE Supervision by notified body MA Braunsweig
  • Operating temperatures of 3000C for 2 hours or 4000C for 2 hours depending on model
  • Available in standard sizes from 250 – 400 and cover all thrust requirements found in relevant specifications
  • Sound attenuating one-piece sheet steel casing is designed as an oval for maximum clearance below the fan
  • Injection-molded aluminum impellers are adjustable and are balanced to grade G6,3 according to VDI 2060 / ISO 1940-1:2003
  • Fan-motor assembly is easily extracted for maintenance
  • Fans are available in unidirectional or full-reversal executions

HVAC Products

VAV

Model BP Variable Air Volume Boxes
  • Bypass air terminals are designed to achieve variable air volume delivery of conditioned air to a room in single duct, constant volume air distribution systems. Variable air volume control is achieved by directing air flow either to a room or to a bypass port in direct response to signals from the room thermostat. BP VAVS are designed for static pressures up to 2” water gauge and supply air capabilities from 200 to 4,000 cfm.
Model TH Variable Air Volume Boxes
  • Single duct air terminal units are designed to regulate the flow of conditioned air in single duct distribution systems.
    They are available in a wide range of standard control sequences and work equally well in constant volume and variable volume systems. They are available in both pressure dependent and pressure independent applications for static pressures up to 3” water gauge and capacities from 80 to 8,000 cfm.

THVAV

sound-attenuator

Sound Attenuators
  • Sound attenuators, or silencers, are installed in HVAC systems to aid in absorbing noise generated by fans or other air moving equipment
  • Energy Industrial offers a wide range of models and sizes to meet specific system requirements
Sand Trap Louvers
  • Sand trap louvers aid in the operations of dampers manually or motor operated from the back of the louver
  • Sand trap louvers are designed to separate debris such as sand, dirt or other similar particulate from the air stream
  • Sand Trap Louvers are an integral component of the ventilation system and are generally mounted at the inlet duct of a ventilation
  • system’s air handling units
  • Louvers can be manually operated or operated by motor
  • Energy Industrial will manufacture louvers to your specifications

sand-trap-louver

Control Panels

control-panel

Model BP Variable Air Volume Boxes
  • Energy Industrial offers control panels for a wide range of applications such as fan starting panels with VFD, Auto Changeover, Duty Sharing, Data Gathering, Building Management, etc

HVAC Sensors & Transmitters

HVAC-sensors

Model BP Variable Air Volume Boxes
  • Temperature Sensors
  • Temperature Transmitters
  • Humidity Transmitters
  • Gauge Pressure Transmitters
  • Differential Pressure Transmitters
  • Static Pressure Transmitters
  • Air Flow Transmitters
  • Current Switches & Sensors
  • Analog to Pneumatic (I/P) Transducers
  • Signal Conditioning Interfaces
  • Power Supplies
  • Air Quality Monitors
  • Carbon Dioxide Detectors
  • Carbon Monoxide Detectors