Dynamics Products

Dynamix Hydro Systems has been supplying quality, efficient and affordable pumping solutions for more than 60 years. Dynamix offers one of the broadest ranges in the industry so you’re sure to find the perfect fit for your project. When you choose Dynamix pumps you’re partnering with a company who stands behind everything they make.

Energy International is the Authorized Distributor for Dynamix Pumps in the Middle East. For more information on Dynamix products contact your Energy International representative.

Dynamix Products

DXCR Vertical Multistage Pumps

DXCR

Non-self-priming, vertical multistage centrifugal pumps. Pumps are suitable for a wide range of applications from pumping potable water to pumping chemicals

Flow rate: 0.3 to 120 m³/h (1.32 – 528.3 gpm)
Head up: Up to 320 meters (1050 ft.)
Ambient temperature: Max. + 40°C (1040F)
Equipped with a maintenance-free mechanical, bellow-type shaft seal
Available in various sizes with various numbers of stages
Available in various materials including cast iron, stainless steel 304 and stainless steel 316

Non self-priming, horizontal, single-stage, centrifugal volute
casing pump with axial suction and radial discharge.

Discharge range from 3 – 660 m3/hr
Head range from 4 – 158 meters.
Motor ratings from 0.37 to 132 kW
Long coupled with TEFC squirrel cage induction motors
EFF2 motors standard. EFF1 motors available on request
Available with gland packing or mechanical seal
Available with fabricated steel base framing
Impellers are dynamically balanced to grade 6.3 of ISO 1940

DXCC Monoblock Centrifugal Pumps

Monoblock

DXHC Horizontal Split Case Pumps

HSC

Horizontal split case pumps with a horizontal pump shaft. The DXHC range is available in single-stage and two-stage models

Discharge range from 20 – 1320 m3/h (88 to 5812 gpm)
Head range from 4 – 88 m (13 to 518 ft.)
Motor ratings from 3 to 160 kW
EFF2 motors are standard. EFF1 motors are available on request.
Available with gland packing and mechanical shaft seal
Impellers dynamically balanced to grade 6.3 of ISO 1940
Pumps can be supplied as a complete unit with motor, coupling, coupling guard and fabricated steel base frame
Construction enables removal and dismantling of the internal parts without disturbing the motor and pipe work

Cast Iron Submersible Pumps are available from 4” to 12 “

Designed using computational fluid dynamics to ensure maximum efficiency
Designed using materials that will work with sand found in bore wells
Journal bearings and impeller wear rings are made of nitrite rubber to ensure peak performance and long life
All pumps provided with upthrust bearing
Low friction, non-return valve reduces water hammer when stopped
Impellers are individually balanced to grade 6.3 ISO 1940
Shaft is protected by stainless steel sleeves which are easily replaced
All components are machined using state-of-the-art CNC machines to ensure dimensional accuracy

DXCI Submersible Pumps

Subs

DXBS Bare Shaft Centrifugal Pumps

Bare Shaft

Non-self-priming, horizontal, single-stage, centrifugal volute casing pump with axial suction and radial discharge

Discharge range from 3 – 660 m3/hr
Head range from 4 – 158 meters
Motor ratings from 0.37 to 132 kW
EFF2 motors standard. EFF1 motors available on request
Available with gland packing or mechanical seal
Available with fabricated steel base framing
Impellers are dynamically balanced to grade 6.3 of ISO 1940
Pull-out back design allows the removal of the motor, bearing bracket and impeller for servicing without dismantling pump

DXVI Vertical Inline Pumps

Non-self-priming, single-stage, vertical inline, close-coupled type centrifugal pumps having radial suction and radial discharge port

Discharge range up to 600 m3/h
Head range up to 150 meters
Motor ratings up to 132 kW.
Offer floor space savings versus end suction and horizontal split case pumps
Inline construction makes pipework easier. Pipe and fittings offer adequate support for most installations
Large inlet passages have flow straightening vanes to provide excellent suction performance and quiet operation
Impellers are dynamically balanced to grade 6.3 of ISO 1940
EFF2 motors standard – EFF1 motors available on request

SC1

SS Subs

DXSS Stainless Steel Submersible Pumps

Stainless Steel Submersible Pumps are available from 4” to 10 “

Pumps are fabricated from AISI 304 stainless steel
Pumps equipped with water lubricated rubber wear rings and bush bearings
State-of-the-art computerized design for higher efficiency
Stainless steel sheet construction offers a very low
coefficient of friction reducing energy consumption
Pump can withstand harsh, abrasive and corrosive environments
All pumps equipped with a non-turn valve to prevent back flow and reduce water hammer when stopped

Drainage & Sewage Pumps

Dynamix offers a complete line of sewage and drainage pumps suitable for a wide range of applications

DXAP Drainage Pumps – 0.5 to 3.0 HP
DXAS Heavy Duty Construction Pumps – 1.5 to 15 HP
DXBP Stainless Steel Submersible Effluent Vortex Pumps
DXFP Sewage Pumps 1.0 to 3.0 HP
DXGP Grinder Pumps 1.0 to 5.0 HP
DXHP Heavy Duty Sewage Pumps 5.0 to 30.0 HP
DXLP Large Volume Water Pumps 3.0 to 15.0 HP
DXMP Composite Case Submersible Drainage Pumps
DXSP Cast Iron Submersible Drainage Pumps

Sewage

Sub Motors

Submersible Motors

Oil and Water Filled from 3” to 10” in cast iron and stainless steel
Available in 50 Hz rated at 2900 rpm and 60 Hz rated at 3450 rpm
All components are manufactured with superior quality materials and precision machined

Pressure Booster Sets

Dynamix Aquapack – Booster Sets with 2 to 4 DXCR Pumps
Subpack – Booster Sets with 2 to 4 Submersible Pump
Hydro Series- Compact, Automatic Pressure Booster Pumps
DXPD Home Pressure Booster Pumps

Booster

Solar

Solar-Powered Pumps

Solar Centrifugal Monoblock Pumps
Solar Stainless Steel Submersible Bore Well Pumps

Dynamix Fire Fighting Pumpsets

Dynamix Hydro Systems Fire Fighting Pumpsets are designed with your safety in mind. Manufactured from the finest materials and crafted using the latest state-of-the-art technologies, Dynamix pumpsets protect your investments and insure the safety of your building’s occupants.

All Dymanix fire pumpsets meet or exceed the requirements set by NFPA 20. They are available in Horizontal Split Case and End Suction variants with your choice of electric or diesel power. Dynamix fire pumpsets offer discharge ranges from 500 to 3,000 gpm and head ranges from 40 to 230 psi. All main components, with the exception of the fuel tank and common controller, are mounted on a common base frame offering a compact, efficient solution. Dynamix can also supply a complete packaged system with all required accessories ready for site installation.

XBSD